Modelling of a Single-Story Residential House in Revit

 Introduction

In this project, I combined AutoCAD and Revit to make a single-story residential home, with four bedrooms (with attached bathrooms), chimney, and open porch.

Drawing of the House

The drawing of the house is drawn in AutoCAD. 

Drawing Specifics

The Plinth Level is at 2', Sill Level is at ~0' for all windows except the Toilet windows (~5') while the Slab level is at 13'. 

BIM Model

The BIM model was made in Revit. There was no focus on plumbing, HVAC, electrical networks, etc. Only the Building was modelled.